How are you taking part in this consultation?

You will not be able to change how you comment later.

You must be signed in to answer questions

    The content on this page is not current guidance and is only for the purposes of the consultation process.

    What the procedure involves

    PNP involves the direct stimulation of the PN sending a signal to the diaphragm to contract, which produces the inhalation phase of breathing. It aims to provide ventilatory support for people with intact PNs and functioning diaphragm muscles.

    The procedure is usually done by a thoracic approach (either an open thoracostomy or a thoracoscopic technique) and under general anaesthesia. Once the PN is identified and tested, an electrode is placed around the nerve in the chest, and then stabilised. The electrode is connected to a subcutaneous receiver usually placed in the chest wall. An external transmitter (powered by batteries) then sends radiofrequency signals to the device through an antenna which is worn over the receiver. The receiver translates radio waves into stimulating electrical pulses that are delivered to the PN by the electrode, to achieve diaphragm contraction and support breathing. The device is tested during and after the surgery to ensure that it works. This procedure is usually done bilaterally and can also be done unilaterally. A cervical approach can also be used and is done under general or local anaesthesia, but this is less common.

    After implantation the person follows a diaphragm conditioning programme, which involves progressive use of the system for increasing periods of time with gradual weaning from the ventilator.